Increase disc BM20/BM20Plus fine mesh 0.9x0.9 mm

Increased disk specific for Braumeister normal BM20 or Plus

Version with filtering disc with small holes 0.9x0.9mm

Main disk thickness 3mm.

The product is composed of

A-main disc diameter 297 mm thickness 3 mm

B-Filter disk

C-Thickness for central pressure

For its block to the malt pipe the original Braumeister pipe is not used but directly the thickness supplied (C). In this way the yield increase disk is pressed in the center improving the pressure applied to the malt pipe which is thus applied to the whole circumference in a homogeneous way.

Surface finish of the main mirror disk by electrolyte immersion electropolishing. Passivated for immersion for more than 3 hours

All the products are internally tested by BacBrewing but we also like to give them to our customers to test them and see if they actually work, what can be improved etc. So for this product we entrust a customer who has been using Braumeister products for years

The following table is the result of a test made on a Braumeister BM50

Pre-boil results:

As you can see from the chart 16kg of malt have been used (BM50), so the 23% more than the standard malt-pipe capacity (13kg). The same percentage can be obtained  with the BM20 from 6 to 7,4kg The percentage of increase yield is 23% also with regard to the version BM10