MOCA Certified
Payments
€5 off with Satispay
Crank for shovel whirlpool BM20-50
Safe Payments
Fast Shipping
Free Returns
Crank can be attached to the blade whirlpool to get a powerful whirlpool Braumeister BM20-BM50 by hand without the aid of electrical parts.
The bolt handle is supplied with a piece of pipe in stainless steel aisi304 whose task is to take two-hand shovel whirlpool to facilitate the rotation by hand. Also provides a Silicon disk which is inserted into the shaft of the blade with the task of preventing the fall to the bottom of the duct piece.
Reference: BB500.BM20-50.001
Brand: BacBrewing
Shovel whirlpool for BM20-50
Reference: BB500.BM20-50.002
Brand: BacBrewing
Adaptor drill whirlpool BM20-50
Reference: BBV071021
Brand: BacBrewing
Replacement of the Hop Spider wall and bottom
Reference: BB.BM50.003V2B
Brand: BacBrewing
Increase disc for BM50/BM50Plus large mesh 1,5x1,5 mm
Reference: BB.BM20-50-RIC
Brand: BacBrewing
Spare parts gasket springer in BM20-50 OLD VERSION
Reference: BB.BM20-50.50mm
Brand: BacBrewing
Out of production, last pieces Complete kit for springer filter in a Braumeister BM20 / 50 with hole height 50mm from the bottom
Reference: BB.BM200.005
Brand: BacBrewing
Spare parts disc large mesh for Yeld increase disc BM200
Reference: BB.BM20-50.60mm
Brand: BacBrewing
Out of production, last pieces Complete kit for springer filter in a Braumeister BM20 / 50 with hole height 60mm from the bottom
Reference: BBV044
Brand: BacBrewing
Long brush for clean springer or tubes
Reference: BB.BM20.001
Brand: BacBrewing
Filter disc fine mesh 0,9x0,9 mm for BM20
Reference: BB.BM20.004
Brand: BacBrewing
Filter disc large mesh 1,5x1,5 mm for BM20
Reference: BB.BM20-50-NRIC60
Brand: BacBrewing
Spare parts kit for springer fitting, new version, hole height 60 mm
Reference: BB.BM200.001
Brand: BacBrewing
Filter disc fine mesh 0,9x0,9 mm for BM200
Reference: BBBM50161122
Brand: BacBrewing
Level dipstick for Braumeister BM50 or for pots with internal diameter 435 mm
Reference: BB.BM20.003L
Brand: BacBrewing
Spare part filter disc large mesh 1,5x1,5mm for increase disc BM20
Reference: BB.BM20-50.N50mm
Brand: BacBrewing
New version Complete kit for springer filter in a Braumeister BM20 / 50 with hole height 50mm from the bottom
Reference: BBHS.S004
Brand: BacBrewing
Little press for HopSpider Small
Reference: BB.BM50.003L
Brand: BacBrewing
Spare parts disc large mesh for Yeld increase disc BM50
Reference: BB.BM20-50.N60mm
Brand: BacBrewing
New version Complete kit for springer filter in a Braumeister BM20 / 50 with hole height 60mm from the bottom
Reference: BBBM2050SIF50
Brand: BacBrewing
Siphon for Braumeister BM20 BM50 hole height 50 mm
Reference: BB.BM20.003V2B
Brand: BacBrewing
Increase disc for BM20/BM20Plus large mesh 1,5x1,5 mm
Reference: BB.BM50.004
Brand: BacBrewing
Filter disc large mesh 1,5x1,5 mm for BM50
Reference: BB.BM50.003V2
Brand: BacBrewing
Increase disc for BM50/BM50Plus fine mesh filter 0,9x0,9 mm
Reference: BBHS.S002
Brand: BacBrewing
Kit for HopSpider Small for use in Braumeister BM10
Reference: BB500.BM10.003
Brand: BacBrewing
Crank for shovel whirlpool BM10
Reference: BB500.BM20-50.001
Brand: BacBrewing
Shovel whirlpool for BM20-50
Reference: BB.BM10.003V2B
Brand: BacBrewing
Increase disc for BM10/BM10Plus large mesh 1,5x1,5 mm
Reference: BB.BM20.003S
Brand: BacBrewing
Spare part filter disc fine mesh 0,9x0,9mm for increase disc BM20
Reference: BB.BM20.003V2
Brand: BacBrewing
Increase disc for BM20/BM20Plus large mesh 1,5x1,5 mm
Mantta whirpool
La consiglio perche' con il trapano non ri riesce ad avere il giusto controllo della velocita' e si rischia di schizzare ovunque. A mono molto meglio. Utilissimo
Works to a degree...
This sort of works but the design is a bit Clunky. I found the silicon ring softens with heat & slips down into the hot wort followed by the the Long-tube. There is also very little leverage (torque) at the handle. I suspect the drill attachment is a better option with hindsight.
Whirlpool handle
Great piece of kit. Easier than balancing with a drill.
