- NEW - Trub Stopper 260 or 390 microns
- NEW - Parts for Grainfather
- Parts for Braumeister
- Shovel whirlpool
- Tecnological cap for barrel
- Hop Basket
- Springer (bazooka)
- Cockpit for probes
- Thermal probe
- Vision, measurement, control
- Sparge and recirculation
- Ball valves inox 3 pcs
- Threaded fittings inox ISO-4144 E EN 10241
- Silicone gasket
- Silicone tubes
- Various parts
- Spare parts
- Featured category
Large shovel whirlpool
A very well whirlpool without oxygenation
Shovel to perform a powerful whirlpool in a short time and without effort using a drill or screwdriver on a quantity of must of at least 70 liters. For smaller productions we recommend the use of the small whirlpool Paletta
The 75 cm long shaft is 12 mm diameter in solid AISI304 stainless steel, the 3 pallets are 20/10 thick are 120mm wide in AISI304 stainless steel welded tig to the 120 ° shaft between them with a particular shape that does not disturb the bottom and does not cause splashing during extraction. Thanks to the fact that there are three and not two pallets, everything is balanced, making it easier to keep the blade in the center.
Electropolished surface finish mirror, electrodecapata, passivated.
It is supplied standard with a reduction to 10mm at the apex of grip in the spindle.
Once the shovel has been inserted, gradually start the drill, keeping the speed constant with the regulator and when the must has reached the congenial peripheral speed, slowly remove the blade while keeping the speed constant. Thanks to the teardrop shape of the blades, there will be no outgoing splashes, the effort will gradually decrease thus avoiding the unpleasant effect of the "motorboat"!
Shipment abroad is considered by DHL to be voluminous and passes from the basic transport price to the increased transport price
On the Youtube page you can see a MOVIE.