Shovel whirlpool BM10

Scoop to run a powerful whirlpool in a Braumeister BM10 in a short time, effortlessly and, thanks to the fact that it is inserted into the central shaft of the braumeister, without running the risk of going to slam on the internal resistances to the BM. The actual diameter of action is 173mm and the shape of the scoop prevents it from going to slam on the temperature probe

The body of the scoop is obtained from a tube diameter foreign 14mm, internal 11mm stainless steel aisi304 long 39, 5cm, being a tube is simple to clean through a brush. The 3 pallets are 2mm thick stainless steel aisi304 welded to the shaft at 120 ° between them with a particular shape that does not disturb the bottom and does not cause splashing in the extraction phase.

The apex of the tube has a diameter reduction of 13mm to be able to use a drill with a 13mm spindle without adapters

If you do not have a drill or a screwdriver with a 13 mm spindle then you need the Crank to shovel whirlpool BM10

The scoop is supplied with a food silicone disc to be inserted first into the shaft to avoid creeps at the base of the body supporting the central shaft of the braumeister can then be inserted before the end of the boil to perform its sanitization.

Once inserted the paddle turn the throttle at the desired speed or gradually start the drill while keeping the speed constant with the regulator and when the must has reached the peripheral speed, remove the blade while maintaining stable the rotation speed so as not to defeat the rotary motion of the must. Thanks to the drop shape of the blades you will not have outgoing sketches.

Once inserted the paddle turn the throttle at the desired speed or gradually start the drill while keeping the speed constant with the regulator and when the must has reached the peripheral speed, remove the blade while maintaining stable the rotation speed so as not to defeat the rotary motion of the must. Thanks to the drop shape of the blades you will not have outgoing sketches.