
Reference: BB.RB013
Brand: Generico
Ball lock connection with hose holder D 7mm
Ball-lock gas connection with hose holder D 7mm
Complete Kit to load the barrel CO2 through the jolly Gas connection with monitoring of the pressure or depression of the barrel by reading the gauge. To refill the barrel just check that the pressure is positive. Connect the pre-filled beer pipe from the fermenter to the barrel tap, open the fermenter tap, vent the pressure by opening the vent and open the barrel tap. In this way thanks to the open vent enters beer and exits CO2. When the vent comes out beer means that the barrel is filled. Through the use of this kit it is also possible to use the barrel for tasting, for example during a fair in the certainty not to oxidize the beer because the tapping does not allow the entrance of air. For this specific use always check that the pressure is positive
Reference: BB.RB013
Brand: Generico
Ball-lock gas connection with hose holder D 7mm
Reference: BB.RB012
Brand: Generico
Ball-lock gas connection with hose holder D 7mm
Riferimento: BB.RB225
Marca: BacBrewing
Tappo tecnologico per botte con foro barrique da 225 litri -Kit completo-
Riferimento: BB.RB008
Marca: BacBrewing
Ricambio del solo tappo in silicone.
Riferimento: BB.RB004
Marca: BacBrewing
Cilindro raffreddatore per botti-caratelli 20/30 litri
Riferimento: BB.RB20-30
Marca: BacBrewing
Tappo tecnologico per botte con foro barrique da 20-30 litri -Kit completo-
Riferimento: BB.RB006
Marca: BacBrewing
Cilindro raffreddatore per botti-caratelli 225 litri
Riferimento: BB.RB007
Marca: BacBrewing
Tappo completo per botti con foro cocchiume barrique
Riferimento: BB.RB50-60
Marca: BacBrewing
Tappo tecnologico per botte con foro barrique da 50-60 litri -Kit completo-
Riferimento: BB.RB005
Marca: BacBrewing
Cilindro raffreddatore per botti-caratelli 20/30 litri
Riferimento: BB.RB013
Marca: Generico
Attacco jolly con portagomma 7 mm
Kit CO2 for tecnological cap barrel