Chiller clamp 1-1/2"


Chiller hose with 1-1 / 2 "clamp connection


 Customer ratings and reviews
 (5/5)  - 1 rating(s)
View distribution

Safe Payments


Fast Shipping


Free Returns


Chiller tube for cooling fermenters with 1"1/2 clamp connection. With this chiller it is possible to cool the fermenting wort for those who use for example a 14 gallon SS Brewtech fermenter but who are making a minibatch, therefore the original cooler does not get to be submerged.

  • Length of cooling tube 30cm/11,8", diameter 20mm/0.78"
  • Hose connector for glycol inlet/outlet pipes diameter 12mm/0,47"
  • The cooler must be mounted making sure that the arrow printed on the clamp is pointing upwards, in this way all the air is expelled and there are no losses in thermal transmission.
  • The glycol outlet tube is marked and is the straight one up, the tube bent downwards is the inlet tube.
  • All stainless steel, pickled by immersion, electropolished, passivated by forced immersion for more than three hours.
  • Individually tested at a pressure of 9bar/130Psi.

Gasket and clamp not included but available

Clamp 1-1/2" silicone seal

Clamp 1-1/2"

Product Details
You might also like
2 other products in the same category:
The product review request is automatically sent after 15 days from the shipment date. It is possible to review only the products actually purchased. We ask for an opinion on the product to help other Homebrewers make choices based also on the experience of others who have bought and tried the product. <br/>Is appreciate the review in your own language
All the reviews on this page are ordered by date.
By on  03 Nov. 2023 (Chiller clamp 1-1/2") :
The customer has rated the product but has not posted a review, or the review is pending moderation