- --NEW-- Not just beer
- Parts for Braumeister
- Parts for Grainfather
- Trub Stopper 400 microns
- Tecnological cap for barrel
- Shovel whirlpool
- Hop Basket
- Springer (bazooka)
- Cockpit for probes
- Thermal probe
- Vision, measurement, control
- Sparge and recirculation
- Ball valves inox 3 pcs
- Adhesive seal silicone Food Grade
- Threaded fittings inox ISO-4144 E EN 10241
- Silicone gasket
- Silicone tubes
- Various parts
- Spare parts
O-ring for gas/liquid male ball keg connection
Kit of 5+5 food grade silicone O-rings to replace the o-rings of the gas or liquid male ball-keg connectors. Generally the o-rings supplied with the ball-keg couplings are of poor quality, inhomogeneous shape, poor quality nitrile rubber therefore the seal is not guaranteed especially after several hooking-unhooking. If you check, the inside of the female connector turns black, that's rubber from the o-ring!
In the photos of the product you can appreciate the difference in shape by microscope comparing the BacBrewing red silicone o-ring with the black o-ring of a male connector that has never been used.
Also in the photos you can see the inside of a female connector ball keg used with the original black o-ring. You can see the black and more zoomed rubber fibers of the o-ring flaking off. That rubber, before the connector is fully coupled, comes into contact with the beer and is sucked in ...... de gustibus!
A syringe containing 2ml of FDA-certified food grade grease is also supplied to slightly lubricate the o-ring and facilitate coupling.
Lubricate only the external o-ring
5 O-rings for male ball-keg connection (gas or liquid)
5 O-rings for shutter male ball-keg connection (gas or liquid)
1 Syringe with 2 ml of FDA food grade grease