NEW- Aphrometer 0-6 bar WITH VENT


Pressure gauge for bottle crown cap 26 or 29 mm


 Customer ratings and reviews
Nobody has posted a review yet

Aphrometer or as it is best known, pressure gauge bottle crown 26 or 29 mm

NEW VERSION complete with a vent screw in case the internal pressure is too high with risk of bottle explosion. By simply unscrewing it you can release the pressure to avoid explosions


With the aphrometer it is possible to monitor the internal pressure of the bottle during the maturation/fermentation phase of the beer.

Simple use, intended for use with 26 or 29mm crown cap bottles. Using a normal mechanical capping machine once the bottle has been plugged using the equipped crown plugs (not supplied, to be bought apart), simply tighten the manometer to the cap. Once the O-ring touches the crown cap, give a half turn to the manometer through the use of a 14mm wrench. The seal is thus guaranteed. Do not use the gauge case to tighten.

Manometer with painted metal case 50mm diameter, range 0-6 bar, complete with pre-assembled brass connection, ready to use, silicone O-rings for food. Equipped crown caps 26 mm and equipped crown caps 29 mm diameter not included, to be purchased apart from

Video test of pressure gauges

Product Details
You might also like
8 other products in the same category:
The product review request is automatically sent 15 days after the shipment date. It is possible to review only the products actually purchased. Reviews are not requested in exchange for a discount on future purchases, simply ask for an opinion on the product to help other Homebrewers to make choices based also on the experience of others who have bought and tried the product, therefore they are not reviews artfully made fakes like on other famous e-commerce platforms.
All the reviews on this page are ordered by date.

Be the first to write your review !

Follow us on Facebook