Complete spunding valve


Ball keg joint, pressure gauge and automatic regulator


 Customer ratings and reviews
Nobody has posted a review yet
in this language

With this article you can monitor the pressure of the keg with ball keg and prevent overpressure thanks to the automatic discharge regulator. Setting it for example at 2 bar (30 psi) the carbonation takes place up to 2 bar. If the pressure rises again automatically the regulator discharges too much CO2 into the environment, thus avoiding over-carbonation or explosion of keg

The operation of the regulator takes place through the force of pressure of the internal spring exerted on a shutter, therefore also the variation of temperature summer winter and ambient humidity changes the answer and this is a normal thing of all the mechanical regulators, therefore discrepancies between the setting of the knob and the actual reading of the pressure gauge are possible

Complete with ball keg gas connection, 6 bar pressure gauge and automatic regulator. It is supplied as shown in the photo, pre-assembled and ready for use

To preset the drain valve, the following are the settings always found during the tests, however it is recommended to carry out preliminary tests.

20=0.5 bar

30=1 bar

35=1.5 bar

40=2 bar

45=2.5 bar

50=3 bar

60=3.5 bar

70=4 bar


Product Details
8 altri prodotti della stessa categoria:

Be the first to write your review !

Follow us on Facebook