- NEW - Adhesive seal silicone Food Grade
- NEW - Trub Stopper 400 microns
- NEW - Parts for Grainfather
- Parts for Braumeister
- Shovel whirlpool
- Tecnological cap for barrel
- Hop Basket
- Springer (bazooka)
- Cockpit for probes
- Thermal probe
- Vision, measurement, control
- Sparge and recirculation
- Ball valves inox 3 pcs
- Threaded fittings inox ISO-4144 E EN 10241
- Silicone gasket
- Silicone tubes
- Various parts
- Spare parts
- Featured category
External filter Grainfather
External filter for Grainfather
New filter that replaces the original internal filter of the Grainfather. The problem with the original filter is that if it becomes clogged, the flow decreases considerably, sometimes even reaching total blockage, significantly lowering efficiency, it is also a filter that paradoxically does not filter. In fact, it often happens that coarse parts are not blocked and once they enter the pump impeller they even risk blocking it. If this happens it is a big problem as there is no possibility to disassemble it being directly connected to the vat and the vat is full of must.
With this new filter all this does not happen. The filter has been specifically designed in BacBrewing in such a way as to make it even removable and cleanable with a full pot.
For its use the original filter must not be mounted, to mount the new filter the original bulkhead M14x1 is used
Since the old versions up to 2016 have the M16 bulkhead, an M14 bulkhead is also provided
The article is composed of all the parts necessary to obtain the complete external filtering system
Filter cylinder with 400 or 800 microns of your choice weave obtained from electro-pointed micro-perforated sheet, not mesh.
External cylinder in pyrex borosilicate glass thickness 5 mm
Totally disassemblable, totally built in pickled stainless steel, electropolished and passivated with acids that comply with the most severe USA ASTM 380-967 directive and with materials and procedures that comply with EU MOCA regulations, all welding is performed in Argon TIG.
All silicone parts are made internally in BacBrewing and are FDA certified food grade with resistance from -50 to + 180 ° C
In "Attachments" you can find the instructions to download in pdf format