Inline filter - mini Hop Cannon

New in-line filter to be used for filtering the wort before putting it in the fermenter or as a bottling filter

Available in three sizes

• Small, size 5‘ with F 1/2’ BSPP brass threads, total height 18 cm
• Medium, size 7‘ with F 3/4’ BSPP brass threads, total height 24 cm
• Large, size 10‘ with threads F 1’ BSPP brass, total height 32 cm

In addition to the size you can also choose the filtration pattern

• 250 micron
• 400 micron
• 900 micron

Filter made from expanded stainless steel sheet, not mesh, so no stretch marks over time.

The filtering cylinder is zigzagged to allow an increase in filtering surface area of +30% for the same diameter

FDA-certified black silicone gaskets

Atlas Made in Italy filter container made of non-toxic material suitable for food contact, maximum temperature 45°, maximum pressure 8 bar

In addition to the filtration function, the mini Hop Cannon type is also available to force a hopping during a recirculation in fermentation, bottling or even, positioned after the keg, in line at tapping. This possibility is, however, reserved for the Medium and Large sizes and the 250 and 400 micron filtration plots.

Medium and Large versions equipped with a vent valve at the top.

Observe the inlet and outlet connections stamped on the blue cap

• Hop pellet capacity Medium version 380 grams
• Hop pellet capacity Large version 560 grams

In contrast to the filter version where the filter cylinder and gaskets are detached from each other, the gaskets of the hop pellet filter cylinder are incorporated and not removable. Thanks to the possibility of purchasing both filter cylinders and hopping cylinders separately as spares, a variety of uses are possible with just one filter container.

It is not possible to purchase just the container (blue and transparent part) without filter.